Quote:
Originally Posted by mmglobal
Hey Jeff... I'm so sorry that you are still dealing with these issues. Talk to me later in the week. I have a thoracic MRI scheduled on Tuesday. My ProDisc-Novas should be a bit more MRI friendly since they have more titanium and less cobalt chrome, but I expect the artifact to be substantial. I already talked it over with MRI technician... he recommended teh 1.5 tesla mri instead of the stronger 3.0 because that will have less artifact.
Call me Wednesday or Thursday and I'll tell you more.
Mark
|
I know this post is 5 years old but I wish I would have noted this information 5 years ago but did not run across it until today, 4 month AFTER I had a 3 Teslas ri scan with my 2 prodiscs C4-6.
If you are planning on having an MRI of your cervical with existing ADR implants then DO NOT have a 3 TESLA. It got quite hot in my spine in 10 minutes and the result was a waste due to the much increased artifacts of 3T! Trip and cost wasted. What I have also learned is that the "upright" mri with its only .3 permanent magnet makes grainy but better picture of a spine with metal hardware installed. Find one of these if you re trying to find out what is going on around your ADRs!