todays funny

[chasswen]

Attendant: Welcome aboard Ala Carte Air, sir. May I see your ticket?

Passenger: Sure.

Attendant: You're in seat 12B. That will be $5, please!

Passenger: What for?

Attendant: For telling you where to sit.

Passenger: But I already knew where to sit.

Attendant: Nevertheless, we are now charging a seat locator fee of $5.
It's the airline's new policy.

Passenger: That's the craziest thing I ever heard. I won't pay it.

Attendant: Sir, do you want a seat on this flight, or not?

Passenger: Yes, yes. All right, I'll pay. But the airline is going to hear about this.

Attendant: Thank you. My goodness, your carry-on bag looks heavy.
Would you like me to stow it in the overhead compartment for you?

Passenger: That would be swell, thanks.

Attendant: No problem. Up we go, and done! That will be $10, please.

Passenger: What?

Attendant: The airline now charges a $10 carry-on assistance fee.

Passenger: This is extortion. I won't stand for it.

Attendant: Actually, you're right, you can't stand. You need to sit, and fasten your seat belt. We're about to push back from the gate. But, first I need that $10.

Passenger: No way!

Attendant: Sir, if you don't comply, I will be forced to call the air marshal.
And you really don't want me to do that.

Passenger: Why not? Is he going to shoot me?

Attendant: No, but there's a $50 air-marshal hailing fee.

Passenger: Oh, all right, here, take the $10. I can't believe this.

Attendant: Thank you for your cooperation, sir. Is there anything else I can do for you?

Passenger: Yes. It's stuffy in here, and my overhead fan doesn't seem to work. Can you fix it?

Attendant: Your overhead fan is not broken, sir. Just insert two quarters into the
Overhead coin slot for the first five minutes.

Passenger: The airline is charging me for cabin air?

Attendant: Of course not, sir. Stagnant cabin air is provided free of charge.
It's the circulating air that costs 50 cents.

Passenger: I don't have any quarters. Can you make change for a dollar?

Attendant: Certainly, sir! Here you go!

Passenger: But you've given me only three quarters for my dollar.

Attendant: Yes, there's a change making fee of 25 cents.

Passenger: For cryin' out loud. All I have left is a lousy quarter?
What the heck can I do with this?

Attendant: Hang onto it. You'll need it later for the lavatory.

[chasswen]

CHINESE SICK LEAVE : 'I NO COME WORK TODAY!!!'

Hung Chow calls into work and says, 'Hey, I no come work
today, I really sick . Got headache, stomach ache and legs
hurt, I no come work.'
The boss says, 'You know something, Hung Chow, I really
need you today. When I feel sick like you do, I go to my
wife and tell her to give me Sex. That Makes everything
better and I go to work.. You try that.'

Two hours later Hung Chow calls again. 'I do what You
say and I feel Great. I be at work soon.........You got
nice house'

[mmglobal]

Tools explained by an engineer:


DRILL PRESS:
A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the freshly-painted vertical stabilizer which you had carefully set in the corner where nothing could get to it.

WIRE WHEEL:
Cleans paint off bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprints and hard-earned calluses from fingers in about the time it takes you to say, 'Oh sh--....'

ELECTRIC HAND DRILL:
Normally used for spinning pop rivets in their holes until you die of old age.

SKILL SAW:
A portable cutting tool used to make studs too short.

PLIERS:
Used to round off bolt heads. Sometimes used in the creation of blood-blisters.

BELT SANDER:
An electric sanding tool commonly used to convert minor touch-up jobs into major refinishing jobs.

HACKSAW:
One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

VISE-GRIPS:
Generally used after pliers to completely round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

WELDING GLOVES:
Heavy duty leather gloves used to prolong the conduction of intense welding heat to the palm of your hand.

OXYACETYLENE TORCH:
Used almost entirely for lighting various flammable objects in your shop on fire. Also handy for igniting the grease inside the wheel hub out of which you
want to remove a bearing race.

TABLE SAW:
A large stationary power tool commonly used to launch wood projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground after you have installed your new brake shoes, trapping the jack
handle firmly under the bumper.

EIGHT-FOOT LONG YELLOW PINE 2X4:
Used for levering an automobile upward off of a trapped hydraulic jack handle.

E-Z OUT BOLT AND STUD EXTRACTOR:
A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.

BAND SAW:
A large stationary power saw primarily used by most shops to cut good aluminum sheet into smaller pieces that more easily fit into the trash can after you cut on the inside of the line instead of the outside edge.

TWO-TON ENGINE HOIST:
A tool for testing the maximum tensile strength of everything you forgot to disconnect.

CRAFTSMAN 1/2 x 24-INCH SCREWDRIVER:
A very large pry bar that inexplicably has an accurately machined screwdriver tip on the end opposite the handle.

AVIATION METAL SNIPS:
See hacksaw.

PHILLIPS SCREWDRIVER:
Normally used to stab the vacuum seals under lids or for opening old-style paper-and-tin oil cans and splashing oil on your shirt; but can also be used, as the name implies, to strip out Phillips screw heads.

STRAIGHT SCREWDRIVER:
A tool for opening paint cans. Sometimes used to convert common slotted screws into non-removable screws.

PRY BAR:
A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER:
A tool used to make hoses too short.

HAMMER:
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate the most expensive parts adjacent the object we are trying to hit.

MECHANIC'S KNIFE:
Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on contents such as seats, vinyl records, liquids in plastic bottles, collector magazines , refund checks, and rubber or plastic parts. Especially useful for slicing work clothes, but only while in use.

DAMMIT TOOL:
Any handy tool that you grab and throw across the garage while yelling 'DAMMIT' at the top of your lungs. It is also, most often, the next tool that you will need.